P043F: Evaporative Emission System Leak Detection Reference Orifice High Flow
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeNo effect on driving - this only stops the leak self-test from running.
Your car checks the fuel-vapor system for leaks by comparing it to a tiny calibrated hole. This code means too much air is getting through that reference path - usually a cracked pump housing or split hose. It is a test-equipment problem, not a leak in your fuel system.
Key facts
P043F means evaporative Emission System Leak Detection Reference Orifice High Flow. Your car checks the fuel-vapor system for leaks by comparing it to a tiny calibrated hole. This code means too much air is getting through that reference path - usually a cracked pump housing or split hose. It is a test-equipment problem, not a leak in your fuel system. WrenchFair's published fair-price range for this repair is $80–$250 parts and $100–$200 labor at independent shops.
WrenchFair rates P043F a 2-of-5 DIY difficulty (“The pump is usually near the charcoal canister; replacement is bolt-on.”) with a “Drive safe” driveability rating: No effect on driving - this only stops the leak self-test from running. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
no driving symptoms at all
failed emissions test (monitor will not run)
Likely causes
cracked leak detection pump housing
split reference hose
failed leak detection pump
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection.
Smoke-test or visually inspect the pump and its hoses for cracks.
Replace the pump if the housing is cracked or the reference path leaks. Tests: cracked leak detection pump housing
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $250
Labor$100 – $200
Leak detection pump replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P043F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — The pump is usually near the charcoal canister; replacement is bolt-on.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →