Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDrivable; without temperature feedback the computer cannot protect the converter from overheating.
There is a temperature sensor watching your catalytic converter on side 2 (sensor 2 (post-converter)). Its signal is wrong - usually the sensor died from exhaust heat or its wiring got cooked.
Key facts
P043B means catalyst Temperature Sensor Circuit Range/Performance (Bank 2 Sensor 2 (post-converter)). There is a temperature sensor watching your catalytic converter on side 2 (sensor 2 (post-converter)). Its signal is wrong - usually the sensor died from exhaust heat or its wiring got cooked. WrenchFair's published fair-price range for this repair is $80–$250 parts and $100–$250 labor at independent shops.
WrenchFair rates P043B a 2-of-5 DIY difficulty (“The sensor is easy to test but often rusted into the exhaust; penetrating oil and patience help.”) with a “Diagnose soon” driveability rating: Drivable; without temperature feedback the computer cannot protect the converter from overheating. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
no noticeable driving symptoms
Likely causes
failed catalyst temperature sensor
wiring damaged by exhaust heat
corroded or loose connector
loss of reference voltage or ground
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection. Tests: corroded or loose connector
Watch the bank 2 catalyst temperature with live data - a sensor stuck at an impossible value is the culprit. Tests: failed catalyst temperature sensor
Check the wiring for heat damage near the exhaust. Tests: wiring damaged by exhaust heat
With the key on and engine off, check the reference voltage and ground at the component connector with a multimeter.
Suspect the PCM only after every wire and component test passes - module failure is rare.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $250
Labor$100 – $250
Catalyst temperature sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P043B ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — The sensor is easy to test but often rusted into the exhaust; penetrating oil and patience help.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →