P043B

P043B: Catalyst Temperature Sensor Circuit Range/Performance (Bank 2 Sensor 2 (post-converter))

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

There is a temperature sensor watching your catalytic converter on side 2 (sensor 2 (post-converter)). Its signal is wrong - usually the sensor died from exhaust heat or its wiring got cooked.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
  2. Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection. Tests: corroded or loose connector
  3. Watch the bank 2 catalyst temperature with live data - a sensor stuck at an impossible value is the culprit. Tests: failed catalyst temperature sensor
  4. Check the wiring for heat damage near the exhaust. Tests: wiring damaged by exhaust heat
  5. With the key on and engine off, check the reference voltage and ground at the component connector with a multimeter.
  6. Suspect the PCM only after every wire and component test passes - module failure is rare.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$80 – $250
Labor$100 – $250

Catalyst temperature sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P043B ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — The sensor is easy to test but often rusted into the exhaust; penetrating oil and patience help.

Watch this repair on YouTube

Parts & tools

Catalytic converter toolkit — what the job actually takes

Torque specs: Exhaust flange nuts: typically 35–50 Nm — verify spec. O2 sensors: typically 35–50 Nm.

Pro tip: A new cat on an engine that’s burning oil or misfiring will die fast — fix the underlying cause first or you’ll be buying another one.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →