Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonSafe to drive; fix before emissions testing. Prolonged pinging can damage pistons, so do not ignore it for months.
Your EGR valve is stuck shut, so no exhaust gas is being recirculated. The car usually drives normally - you might notice pinging under load - but emissions go up and it will fail an inspection.
Key facts
P042F means exhaust Gas Recirculation A Stuck Closed. Your EGR valve is stuck shut, so no exhaust gas is being recirculated. The car usually drives normally - you might notice pinging under load - but emissions go up and it will fail an inspection. WrenchFair's published fair-price range for this repair is $60–$320 parts and $100–$250 labor at independent shops.
WrenchFair rates P042F a 2-of-5 DIY difficulty (“Valve removal and cleaning or replacement; accessible on most engines.”) with a “Diagnose soon” driveability rating: Safe to drive; fix before emissions testing. Prolonged pinging can damage pistons, so do not ignore it for months. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light on
pinging or knocking under load
failed emissions test
often no driving symptoms
Likely causes
heavy carbon buildup seizing the EGR pintle closed
failed EGR valve motor or solenoid
wiring fault preventing the valve from opening
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Scan for all codes and record freeze-frame data, then clear the code and test-drive to see if it returns.
Visually inspect the wiring, connectors, and hoses around the component for damage, corrosion, chafing, loose pins, or disconnection.
Command the EGR valve with a scan tool and watch the position feedback - no movement means it is seized.
Remove the valve, clean the carbon, and test it; replace if the motor is dead. Tests: failed EGR valve motor or solenoid
Check the valve's wiring and connector while it is off.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $320
Labor$100 – $250
EGR valve cleaning or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P042F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Valve removal and cleaning or replacement; accessible on most engines.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →