Your knock sensor 1 cuts in and out - usually a loose connection or a heat-sensitive sensor.
Key facts
P0329 means knock sensor 1 circuit intermittent. Your knock sensor 1 cuts in and out - usually a loose connection or a heat-sensitive sensor. WrenchFair's published fair-price range for this repair is $30–$100 parts and $100–$300 labor at independent shops.
WrenchFair rates P0329 a 3-of-5 DIY difficulty (“Wiggle-test while watching knock activity.”) with a “Diagnose soon” driveability rating: Without reliable knock detection, timing stays conservative - fix reasonably soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light that comes and goes
reduced power under load
Likely causes
Loose or corroded sensor connector (most common)
Damaged wiring
Sensor failing when hot
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Wiggle-test the connector while monitoring knock activity Tests: Loose or corroded sensor connector (most common)
Inspect pins for corrosion
Replace the sensor if it drops out internally
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $100
Labor$100 – $300
Knock sensor connector repair or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0329 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Wiggle-test while watching knock activity.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →