Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIntermittent RPM loss can stall you - fix before it gets worse.
Your engine's RPM signal cuts in and out - usually a loose connection or a failing sensor.
Key facts
P0323 means ignition/distributor engine speed input intermittent. Your engine's RPM signal cuts in and out - usually a loose connection or a failing sensor. WrenchFair's published fair-price range for this repair is $40–$150 parts and $100–$250 labor at independent shops.
WrenchFair rates P0323 a 3-of-5 DIY difficulty (“Intermittent problems need a wiggle test while monitoring.”) with a “Diagnose soon” driveability rating: Intermittent RPM loss can stall you - fix before it gets worse. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light that comes and goes
intermittent stalling
erratic tachometer
Likely causes
Loose or corroded sensor connector (most common)
Failing crank position sensor
Cracked reluctor or tone ring
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Wiggle-test the sensor wiring while watching RPM
Inspect the connector for corrosion Tests: Loose or corroded sensor connector (most common)
Check the reluctor for cracks Tests: Cracked reluctor or tone ring
Replace the sensor if it drops out internally
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$100 – $250
Crank position sensor or connector repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0323 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Intermittent problems need a wiggle test while monitoring.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →