Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Stop drivingOverheated oil loses protection fast. Stop hard driving, let it cool, and change the oil.
Your engine oil is overheating - hard driving, a failed oil cooler, or low oil is the likely cause. Back off and let it cool.
Key facts
P0298 means engine oil over-temperature condition. Your engine oil is overheating - hard driving, a failed oil cooler, or low oil is the likely cause. Back off and let it cool. WrenchFair's published fair-price range for this repair is $50–$400 parts and $50–$250 labor at independent shops.
WrenchFair rates P0298 a 2-of-5 DIY difficulty (“Check oil level and condition first.”) with a “Stop driving” driveability rating: Overheated oil loses protection fast. Stop hard driving, let it cool, and change the oil. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
oil temperature warning
check engine light
possible limp mode
Likely causes
Sustained hard driving or towing (most common)
Failed oil cooler
Low oil level
Cooling system fault
Skewed oil temperature sensor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Stop hard driving and let the oil cool Tests: Sustained hard driving or towing (most common)
Check oil level and condition
Inspect the oil cooler for blockage
Verify the oil temp sensor reading is real
Change the oil - overheated oil should not be kept
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$50 – $400
Labor$50 – $250
Oil change and oil cooler inspection. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0298 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →