Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonNo-start and stalling need prompt attention.
The module that controls your fuel pump has an open circuit - the pump may not run. Expect no-start.
Key facts
P025A means fuel pump module control circuit open. The module that controls your fuel pump has an open circuit - the pump may not run. Expect no-start. WrenchFair's published fair-price range for this repair is $100–$400 parts and $100–$300 labor at independent shops.
WrenchFair rates P025A a 3-of-5 DIY difficulty (“The module is often under the rear seat or in the trunk - easy to reach.”) with a “Diagnose soon” driveability rating: No-start and stalling need prompt attention. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
engine won't start
stalling
Likely causes
Failed fuel pump control module (most common)
Broken wire in the control circuit
Corroded module connector
Failed fuel pump
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check for power and ground at the module
Test for continuity through the control circuit Tests: Broken wire in the control circuit
Verify the module commands the pump on a scan tool Tests: Failed fuel pump control module (most common)
Replace the module if it doesn't respond
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $400
Labor$100 – $300
Fuel pump control module replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P025A ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The module is often under the rear seat or in the trunk - easy to reach.
Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →