P0226: Throttle/pedal position sensor 'C' range/performance
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonErratic throttle is a safety concern - diagnose promptly.
Your throttle's third sensor is reading wrong - drifting or a dead spot. Expect jumpy throttle or limp mode.
Key facts
P0226 means throttle/pedal position sensor 'C' range/performance. Your throttle's third sensor is reading wrong - drifting or a dead spot. Expect jumpy throttle or limp mode. WrenchFair's published fair-price range for this repair is $100–$400 parts and $80–$250 labor at independent shops.
WrenchFair rates P0226 a 2-of-5 DIY difficulty (“Sweep-test all three sensors on a scan tool.”) with a “Diagnose soon” driveability rating: Erratic throttle is a safety concern - diagnose promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
erratic throttle response
possible limp mode
Likely causes
Worn sensor 'C' with a dead spot (most common)
Carbon-fouled throttle plate
Drifting sensor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Clean the throttle body Tests: Carbon-fouled throttle plate
Sweep the throttle and watch all three sensors for dropouts Tests: Carbon-fouled throttle plate
Replace the throttle body if sensor 'C' has a dead spot Tests: Worn sensor 'C' with a dead spot (most common)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $400
Labor$80 – $250
Throttle body cleaning or replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0226 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Sweep-test all three sensors on a scan tool.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →