Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIf the engine sounds normal and compression is good, you're lucky - but verify before trusting it at high RPM again.
Your engine revved past its safe limit - a missed shift, stuck throttle, or transmission fault. Check for damage; over-revving breaks valvetrain parts.
Model notes: On manuals, a 5th-to-2nd money shift is the classic cause. The ECM's rev limiter can't protect against mechanical over-rev from the wheels.
Key facts
P0219 means engine overspeed condition. Your engine revved past its safe limit - a missed shift, stuck throttle, or transmission fault. Check for damage; over-revving breaks valvetrain parts. WrenchFair's published fair-price range for this repair is $0–$2000 parts and $100–$1500 labor at independent shops.
WrenchFair rates P0219 a 3-of-5 DIY difficulty (“The code records the event - the job now is assessing damage.”) with a “Diagnose soon” driveability rating: If the engine sounds normal and compression is good, you're lucky - but verify before trusting it at high RPM again. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the freeze-frame data for the peak RPM reached
Listen for new valvetrain noise
Run a compression test to check for bent valves
Inspect for a sticking throttle or transmission fault that caused the event Tests: Transmission fault causing a flare
Address any mechanical damage found
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $2000
Labor$100 – $1500
Damage assessment and repair - ranges from nothing (no damage) to valvetrain rebuild. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0219 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The code records the event - the job now is assessing damage.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →