Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonAn engine that won't shut off is a safety issue - fix it promptly.
The solenoid that stops fuel to shut off your diesel has an electrical fault. The engine may keep running with the key off, or refuse to start.
Model notes: Primarily a diesel code (older mechanical-pump diesels especially). A runaway/run-on diesel is serious - know how to stall it (high gear, brakes) in an emergency.
Key facts
P0215 means engine shutoff solenoid circuit fault. The solenoid that stops fuel to shut off your diesel has an electrical fault. The engine may keep running with the key off, or refuse to start. WrenchFair's published fair-price range for this repair is $40–$200 parts and $80–$250 labor at independent shops.
WrenchFair rates P0215 a 2-of-5 DIY difficulty (“The solenoid is usually on the injection pump and accessible.”) with a “Diagnose soon” driveability rating: An engine that won't shut off is a safety issue - fix it promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
engine won't shut off with the key (dieseling/run-on)
or engine won't start
possible stalling
Likely causes
Failed fuel shutoff solenoid (most common)
Damaged wiring or connector
Open or short in the solenoid circuit
Blown fuse feeding the solenoid
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check the fuse feeding the solenoid Tests: Blown fuse feeding the solenoid
Verify the solenoid clicks with key-on Tests: Failed fuel shutoff solenoid (most common)
Measure the solenoid's resistance against factory spec
Inspect the wiring and connector Tests: Damaged wiring or connector
Replace the solenoid if it doesn't actuate
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $200
Labor$80 – $250
Fuel shutoff solenoid replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0215 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — The solenoid is usually on the injection pump and accessible.
Pro tip: Relieve fuel pressure first (pull the pump fuse, run the engine until it stalls). Work cold, battery disconnected, extinguisher within reach — no power tools near open fuel.
As an Amazon Associate, WrenchFair earns from qualifying purchases.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →