P0195: Engine oil temperature sensor circuit fault
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonNo immediate driveability impact, but VVT and protection strategies are degraded - fix at your convenience.
Your engine oil temperature sensor has an electrical fault. The computer estimates oil temperature instead - VVT and cooling tweaks get less accurate.
Model notes: Often integrated with the oil level sensor in the oil pan (common on VAG and BMW).
Key facts
P0195 means engine oil temperature sensor circuit fault. Your engine oil temperature sensor has an electrical fault. The computer estimates oil temperature instead - VVT and cooling tweaks get less accurate. WrenchFair's published fair-price range for this repair is $30–$150 parts and $80–$250 labor at independent shops.
WrenchFair rates P0195 a 2-of-5 DIY difficulty (“The sensor is often in the oil pan or filter housing - check the factory manual.”) with a “Diagnose soon” driveability rating: No immediate driveability impact, but VVT and protection strategies are degraded - fix at your convenience. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
no obvious driveability symptoms
possible VVT performance codes
Likely causes
Failed engine oil temperature sensor (most common)
Damaged wiring or connector
Open or short in the sensor circuit
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate the oil temperature sensor per the factory manual Tests: Failed engine oil temperature sensor (most common)
Inspect the wiring and connector for oil contamination or damage Tests: Damaged wiring or connector
Check for opens or shorts in the circuit Tests: Open or short in the sensor circuit
Measure the sensor's resistance at a known temperature against factory spec Tests: Failed engine oil temperature sensor (most common)
Replace the sensor if out of range
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$30 – $150
Labor$80 – $250
Engine oil temperature sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0195 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — The sensor is often in the oil pan or filter housing - check the factory manual.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →