P0164: O2 sensor circuit high voltage, bank 2 sensor 3
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeEmissions-monitoring only - no driveability impact.
Your third oxygen sensor (bank-2 side) is stuck reading rich - usually a bad sensor. The car drives normally.
Key facts
P0164 means o2 sensor circuit high voltage, bank 2 sensor 3. Your third oxygen sensor (bank-2 side) is stuck reading rich - usually a bad sensor. The car drives normally. WrenchFair's published fair-price range for this repair is $40–$150 parts and $80–$180 labor at independent shops.
WrenchFair rates P0164 a 2-of-5 DIY difficulty (“Confirm the vehicle has a sensor 3 before ordering parts.”) with a “Drive safe” driveability rating: Emissions-monitoring only - no driveability impact. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
no driveability symptoms
Likely causes
Failed sensor 3 O2 sensor (most common)
Wiring short to voltage
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Confirm sensor 3 exists on your vehicle
Check the wiring for shorts to voltage Tests: Wiring short to voltage
Replace the sensor if the wiring is good
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$80 – $180
Oxygen sensor replacement (bank 2 sensor 3). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0164 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Confirm the vehicle has a sensor 3 before ordering parts.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →