P0152: O2 sensor circuit high voltage, bank 2 sensor 1
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonRich running fouls the catalyst - diagnose soon.
Your bank-2 front oxygen sensor is stuck reading rich - it could be lying or the engine could actually be running rich.
Key facts
P0152 means o2 sensor circuit high voltage, bank 2 sensor 1. Your bank-2 front oxygen sensor is stuck reading rich - it could be lying or the engine could actually be running rich. WrenchFair's published fair-price range for this repair is $40–$150 parts and $80–$180 labor at independent shops.
WrenchFair rates P0152 a 2-of-5 DIY difficulty (“Check fuel trim and look for real rich causes before replacing the sensor.”) with a “Diagnose soon” driveability rating: Rich running fouls the catalyst - diagnose soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
rich running
poor fuel economy
black smoke
rough idle
Likely causes
Failed O2 sensor stuck rich (most common)
Genuine rich condition (leaking injector, high fuel pressure, restricted air filter)
Wiring short to voltage
Contaminated sensor
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check fuel trims - if they're pegged negative, the rich condition may be real Tests: Genuine rich condition (leaking injector, high fuel pressure, restricted air filter)
Look for leaking injectors, high fuel pressure, or a restricted air filter Tests: Genuine rich condition (leaking injector, high fuel pressure, restricted air filter)
Watch the sensor voltage - stuck near 0.9V suggests a dead sensor Tests: Failed O2 sensor stuck rich (most common)
Check the wiring for shorts to voltage Tests: Wiring short to voltage
Replace the sensor if the mixture is actually fine
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$80 – $180
Upstream oxygen sensor replacement (bank 2 sensor 1) or rich-condition repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0152 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Check fuel trim and look for real rich causes before replacing the sensor.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →