DIY difficulty 2/5
Downstream O2 heater failure. Same as P0135 but for the post-cat sensor that monitors catalyst efficiency.
Owner notes linked to P0141: 6 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Work these checks before spending money — each one rules a cause in or out, cheapest first.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
O2 sensor replacement is the typical fix. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
Got a shop quote? Grade it →
Torque specs: O2 sensors: typically 35–50 Nm (26–37 lb-ft) — verify spec. A dab of nickel anti-seize on the threads; keep it off the sensor tip.
Pro tip: Route the new sensor’s harness exactly like the old one — melted wires on the exhaust are the number-one comeback.
As an Amazon Associate, WrenchFair earns from qualifying purchases.