P013F: O2 sensor delayed response lean-to-rich, bank 1 sensor 1
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonFuel trim is compromised - replace the sensor soon for driveability and economy.
Your front oxygen sensor is too slow reacting when the mixture goes rich - it's aging. Expect fuel mixture hunting, rough idle, or hesitation.
Key facts
P013F means o2 sensor delayed response lean-to-rich, bank 1 sensor 1. Your front oxygen sensor is too slow reacting when the mixture goes rich - it's aging. Expect fuel mixture hunting, rough idle, or hesitation. WrenchFair's published fair-price range for this repair is $40–$150 parts and $80–$180 labor at independent shops.
WrenchFair rates P013F a 2-of-5 DIY difficulty (“Upstream sensors directly affect fueling - replace a delayed one rather than waiting.”) with a “Diagnose soon” driveability rating: Fuel trim is compromised - replace the sensor soon for driveability and economy. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
rough or hunting idle
hesitation
poor fuel economy
Likely causes
Aging upstream O2 sensor (most common)
Contaminated sensor (coolant, silicone, oil)
Exhaust leak near the sensor
Failing sensor heater
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Watch the upstream sensor's response on a scan tool Tests: Aging upstream O2 sensor (most common)
Check for exhaust leaks ahead of the sensor Tests: Exhaust leak near the sensor
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$80 – $180
Upstream oxygen sensor replacement (bank 1 sensor 1). National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P013F ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Upstream sensors directly affect fueling - replace a delayed one rather than waiting.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →