Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBad air measurement causes poor running and possible limp mode. Drive gently.
Manifold absolute pressure reading implausible. On turbo engines the MAP is critical for boost control.
VW/Audi note (VCDS): KOEO MAP vs baro comparison is a 30-second sanity check.
Model notes: On the 1.4T the MAP sits in the charge piping and can oil-foul over 300k miles.
Key facts
P0106 means mAP sensor range/performance. Manifold absolute pressure reading implausible. On turbo engines the MAP is critical for boost control. WrenchFair's published fair-price range for this repair is $10–$250 parts and $50–$150 labor at independent shops.
WrenchFair rates P0106 a 1-of-5 DIY difficulty (“Usually one bolt and a connector.”) with a “Diagnose soon” driveability rating: Bad air measurement causes poor running and possible limp mode. Drive gently. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
boost issues
rough running
black exhaust smoke
engine will not stay idling
poor fuel economy
engine misfires at speed
Likely causes
Failed MAP sensor
Blocked sensor port (carbon/oil sludge)
Wiring fault
Actual mechanical issue (jumped timing gives odd manifold pressure)
Owner notes linked to P0106: 3 across 2 repairs — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 2 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Compare MAP reading to barometric pressure with key on, engine off - they should nearly match Tests: Actual mechanical issue (jumped timing gives odd manifold pressure)
Remove and inspect the sensor port for blockage Tests: Blocked sensor port (carbon/oil sludge)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$10 – $250
Labor$50 – $150
Cleaning is cheap; sensor replacement costs more. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0106-VAG ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →