P0106Volkswagen / Audi (VAG) specific

P0106: MAP sensor range/performance

DIY difficulty 1/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

Manifold absolute pressure reading implausible. On turbo engines the MAP is critical for boost control.

VW/Audi note (VCDS): KOEO MAP vs baro comparison is a 30-second sanity check.
Model notes: On the 1.4T the MAP sits in the charge piping and can oil-foul over 300k miles.

Key facts

Symptoms

Likely causes

Owner notes linked to P0106: 3 across 2 repairs — these are counts of owner-written notes, not odds of fixing your car.

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 2 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Compare MAP reading to barometric pressure with key on, engine off - they should nearly match Tests: Actual mechanical issue (jumped timing gives odd manifold pressure)
  2. Remove and inspect the sensor port for blockage Tests: Blocked sensor port (carbon/oil sludge)

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$10 – $250
Labor$50 – $150

Cleaning is cheap; sensor replacement costs more. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0106-VAG ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

1 of 5 — Usually one bolt and a connector.

Watch this repair on YouTube

Parts & tools

Intake & throttle toolkit — what the job actually takes

Torque specs: Throttle body bolts: typically 8–12 Nm — verify spec.

Pro tip: Some cars need a throttle relearn after cleaning (scan tool or battery-disconnect procedure), or the idle will hunt.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →