P009A: Intake air temperature / ambient air temperature correlation
DIY difficulty 1/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeMinor driveability impact - fix when convenient.
Your intake air temp and outside temp sensors disagree after sitting overnight - one is lying.
Key facts
P009A means intake air temperature / ambient air temperature correlation. Your intake air temp and outside temp sensors disagree after sitting overnight - one is lying. WrenchFair's published fair-price range for this repair is $15–$60 parts and $50–$120 labor at independent shops.
WrenchFair rates P009A a 1-of-5 DIY difficulty (“Compare both readings to the real temperature on a cold engine.”) with a “Drive safe” driveability rating: Minor driveability impact - fix when convenient. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine light
Likely causes
Skewed IAT sensor (most common)
Skewed ambient temperature sensor
Heat soak from a hot engine bay (false code)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
With the engine cold-soaked, compare IAT and ambient to actual temperature Tests: Skewed ambient temperature sensor
Replace the sensor that reads wrong
Rule out heat soak by testing first thing in the morning Tests: Heat soak from a hot engine bay (false code)
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $60
Labor$50 – $120
Temperature sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P009A ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
1 of 5 — Compare both readings to the real temperature on a cold engine.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →