P0033: Turbocharger bypass valve control circuit fault
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonCompressor surge stresses the turbo - don't ignore it, but normal driving is fine.
The valve that vents turbo pressure when you lift off the gas has an electrical problem. Expect odd whooshing, surging, or a stumble when you shift or back off the throttle.
Model notes: Also called a diverter valve or blow-off valve depending on whether it recirculates or vents to atmosphere. Aftermarket vent-to-atmosphere valves on cars designed for recirculation can cause this code.
Key facts
P0033 means turbocharger bypass valve control circuit fault. The valve that vents turbo pressure when you lift off the gas has an electrical problem. Expect odd whooshing, surging, or a stumble when you shift or back off the throttle. WrenchFair's published fair-price range for this repair is $60–$250 parts and $80–$200 labor at independent shops.
WrenchFair rates P0033 a 2-of-5 DIY difficulty (“The valve is usually accessible on the turbo or charge pipe; testing is power/ground checks plus a functional test.”) with a “Diagnose soon” driveability rating: Compressor surge stresses the turbo - don't ignore it, but normal driving is fine. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Disconnected or split vacuum line (vacuum-operated valves)
ECM fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 6 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Locate the bypass valve on the turbo or charge piping Tests: Failed bypass (diverter) valve solenoid (most common)
Inspect the connector, wiring, and vacuum lines for damage or disconnection Tests: Damaged wiring or corroded connector at the valve
With the key on, check for proper voltage and ECM ground control at the valve connector Tests: Damaged wiring or corroded connector at the valve
Apply power and ground to the valve and listen/feel for a click
Check for vacuum leaks if the valve is vacuum-operated
Replace the valve if it doesn't respond or the diaphragm is torn
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $250
Labor$80 – $200
Turbocharger bypass (diverter) valve replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0033 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — The valve is usually accessible on the turbo or charge pipe; testing is power/ground checks plus a functional test.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →