Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Stop drivingMinimize driving until diagnosed. If you hear chain rattle on cold start or the engine runs poorly, park it - a jumped timing chain can destroy an interference engine.
At a glance
What it means
Your engine's timing chain has stretched or a guide is failing - the cam and crank are out of sync. On most modern engines this can cause catastrophic damage if the chain jumps. Don't ignore this one.
Most common cause
Stretched timing chain
Can you drive?
No.
Severity
High
DIY cost (parts only)
$200 – $600
Shop cost (parts + labor)
$1000 – $2600
DIY difficulty
5 of 5 — Timing chain replacement is major surgery.
Can I drive with P0016?
Can I drive with a P0016 code?
No. Minimize driving until diagnosed. If you hear chain rattle on cold start or the engine runs poorly, park it - a jumped timing chain can destroy an interference engine. Have it towed rather than driven. (The only exception is moving the car a few feet to a safe spot, then shutting the engine off.)
How serious is P0016?
High. WrenchFair rates this one “Stop driving” — the most serious rating, reserved for faults that can strand you or cause real damage if you keep driving. Minimize driving until diagnosed. If you hear chain rattle on cold start or the engine runs poorly, park it - a jumped timing chain can destroy an interference engine.
Will P0016 go away on its own?
The warning light can turn off by itself after clean drive cycles, but the code stays stored in the computer's memory and the fault is still there. Clearing it without fixing the cause just buys time — it will come back when the computer re-runs the self-test. Exception: a loose gas cap — tighten it and drive a few days.
Your engine's timing chain has stretched or a guide is failing - the cam and crank are out of sync. On most modern engines this can cause catastrophic damage if the chain jumps. Don't ignore this one.
VW/Audi note (VCDS): Camshaft adaptation/correlation values beyond tolerance in live data confirm stretch without opening the engine.
Model notes: Check oil level immediately - low oil starves the chain tensioner. Listen for chain rattle on cold start.
Key facts
P0016 means crankshaft position - camshaft position correlation, bank 1. Your engine's timing chain has stretched or a guide is failing - the cam and crank are out of sync. On most modern engines this can cause catastrophic damage if the chain jumps. Don't ignore this one. WrenchFair's published fair-price range for this repair is $200–$600 parts and $800–$2000 labor at independent shops.
WrenchFair rates P0016 a 5-of-5 DIY difficulty (“Timing chain replacement is major surgery.”) with a “Stop driving” driveability rating: Minimize driving until diagnosed. If you hear chain rattle on cold start or the engine runs poorly, park it - a jumped timing chain can destroy an interference engine. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
rattle on cold start
check engine light
poor performance
cranks but will not start
Likely causes
Stretched timing chain 8 owner notes link this repair to P0016
Failed chain tensioner/guide 8 owner notes link this repair to P0016
VVT adjuster fault 8 owner notes link this repair to P0016
Low oil level/pressure
Owner notes linked to P0016: 8 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check oil level immediately
Listen for chain rattle on cold start
Check cam adaptation values in scan tool
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$200 – $600
Labor$800 – $2000
Timing chain kit plus major labor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0016 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
5 of 5 — Timing chain replacement is major surgery.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →