Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Stop drivingTiming faults can destroy an interference engine if the chain/belt jumps. Minimize driving until diagnosed.
The cam and crank signals disagree - the timing chain has stretched or a guide is failing. Do not ignore this on an interference engine.
VW/Audi note (VCDS): Camshaft adaptation values beyond tolerance confirm stretch without opening the engine.
Model notes: A7 3.0T: chain-driven - this code plus cold-start rattle means park it until diagnosed. Jetta 1.4T EA211: belt-driven; belt failure is usually sudden, not gradual.
Key facts
P0016 means crank/cam correlation, bank 1. The cam and crank signals disagree - the timing chain has stretched or a guide is failing. Do not ignore this on an interference engine. WrenchFair's published fair-price range for this repair is $200–$600 parts and $800–$2000 labor at independent shops.
WrenchFair rates P0016 a 5-of-5 DIY difficulty (“Timing chain replacement is major surgery.”) with a “Stop driving” driveability rating: Timing faults can destroy an interference engine if the chain/belt jumps. Minimize driving until diagnosed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
rattle on cold start
check engine light
poor performance
cranks but will not start
Likely causes
Stretched timing chain 8 owner notes link this repair to P0016
Failed chain tensioner/guide 8 owner notes link this repair to P0016
VVT adjuster fault 8 owner notes link this repair to P0016
Low oil level/pressure
Owner notes linked to P0016: 8 across 1 repair — these are counts of owner-written notes, not odds of fixing your car.
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
Check oil level immediately
Listen for chain rattle on cold start
Check cam adaptation values in VCDS
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$200 – $600
Labor$800 – $2000
Timing chain kit plus major labor. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P0016-VAG ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
5 of 5 — Timing chain replacement is major surgery.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →