P000D

P000D: B camshaft position slow response bank 2

DIY difficulty 2/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The gadget adjusting your exhaust camshaft timing on the bank-2 side is reacting too slowly - usually dirty or low engine oil gumming up the variable valve timing system.

Model notes: 'B' is usually the exhaust camshaft; bank 2 is the side opposite cylinder 1.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. Check oil level and condition - change oil and filter if overdue or wrong viscosity, then clear and retest
  2. Watch commanded vs. actual bank 2 exhaust camshaft angle on the scan tool during throttle snaps Tests: Clogged or sticking VVT oil control valve (solenoid) for bank 2 exhaust
  3. Inspect and clean or replace the bank 2 exhaust VVT oil control valve and its screen Tests: Clogged or sticking VVT oil control valve (solenoid) for bank 2 exhaust
  4. Check the camshaft position sensor wiring and connector Tests: Faulty camshaft position sensor or damaged wiring
  5. If still slow, evaluate the phaser and timing chain for wear

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $250
Labor$80 – $300

Engine oil change or VVT oil control valve (solenoid) replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for P000D ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

2 of 5 — An oil change is the legitimate first step; the solenoid is usually an accessible bolt-on part.

Watch this repair on YouTube

Parts & tools

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →