Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonHandling is compromised — drive gently and fix it soon.
A suspension warning comes on and the fancy suspension features quit. The car still drives on its springs, just without the electronic help.
Key facts
C0920 means suspension Control Module Internal Fault. A suspension warning comes on and the fancy suspension features quit. The car still drives on its springs, just without the electronic help. WrenchFair's published fair-price range for this repair is $400–$1600 parts and $150–$400 labor at independent shops.
WrenchFair rates C0920 a 4-of-5 DIY difficulty (“Module replacement plus programming — rule out power and wiring first.”) with a “Diagnose soon” driveability rating: Handling is compromised — drive gently and fix it soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
suspension warning light on
adaptive suspension unavailable
ride height may not adjust
Likely causes
module internal electronics failed
water intrusion into the module
voltage spike damage
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Verify clean power and ground to the module.
2. Check for water intrusion at the module and connector. Tests: water intrusion into the module
3. If the self-test still fails with good power, replace the module.
4. Program and calibrate ride height per the service procedure.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$400 – $1600
Labor$150 – $400
Suspension control module replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0920 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Module replacement plus programming — rule out power and wiring first.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →