Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYou can still steer, but assist may be wrong — drive carefully until it's fixed.
A steering warning comes on and the assist feels wrong — too much or too little for how hard you're turning.
Key facts
C0827 means steering Effort Sensor Stuck. A steering warning comes on and the assist feels wrong — too much or too little for how hard you're turning. WrenchFair's published fair-price range for this repair is $300–$1200 parts and $200–$500 labor at independent shops.
WrenchFair rates C0827 a 4-of-5 DIY difficulty (“Usually part of the column assembly — the diagnosis is easy, the part is not.”) with a “Diagnose soon” driveability rating: You can still steer, but assist may be wrong — drive carefully until it's fixed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
power steering warning light on
steering effort feels wrong
assist too strong or too weak
Likely causes
sensor mechanically stuck
sensor failed
wiring fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Watch the effort sensor's live reading while turning the wheel with varying force.
2. Check the sensor connector and wiring.
3. If the wiring is good and the reading is frozen or wild, replace the column assembly.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$300 – $1200
Labor$200 – $500
Steering column replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0827 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Usually part of the column assembly — the diagnosis is easy, the part is not.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →