Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeNo effect on safe driving — but if shutters are stuck closed, watch the temperature gauge in hot weather.
A check-engine or body warning light comes on. You won't feel any difference driving — it's an aero and warm-up feature, though stuck-closed shutters can affect cooling.
Key facts
C062E means active Air Dam Supply Voltage Circuit Low. A check-engine or body warning light comes on. You won't feel any difference driving — it's an aero and warm-up feature, though stuck-closed shutters can affect cooling. WrenchFair's published fair-price range for this repair is $150–$500 parts and $150–$350 labor at independent shops.
WrenchFair rates C062E a 3-of-5 DIY difficulty (“Bumper access varies by car, but the electrical diagnosis is standard.”) with a “Drive safe” driveability rating: No effect on safe driving — but if shutters are stuck closed, watch the temperature gauge in hot weather. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
check engine or body warning light on
shutters visibly stuck open or closed
slightly worse fuel economy
Likely causes
wiring fault
corroded connector
low system voltage
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Look through the grille — check for debris, ice, or bent shutter vanes.
2. Command the shutters with a scan-tool output test and watch them move.
3. Inspect the actuator connector and wiring behind the bumper. Tests: corroded connector
4. Test the actuator motor and supply voltage. Tests: low system voltage
5. Replace the actuator if power and wiring are good but it won't move.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$150 – $500
Labor$150 – $350
Air dam actuator or wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C062E ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Bumper access varies by car, but the electrical diagnosis is standard.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →