Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBase braking is unaffected, but ABS and stability assists are down — drive gently, especially in bad weather.
ABS and stability warnings come on. The hydraulic valves that pulse the brakes aren't all responding, so those assists are degraded.
Key facts
C062D means aBS Valves Range/Performance. ABS and stability warnings come on. The hydraulic valves that pulse the brakes aren't all responding, so those assists are degraded. WrenchFair's published fair-price range for this repair is $300–$1200 parts and $200–$500 labor at independent shops.
WrenchFair rates C062D a 4-of-5 DIY difficulty (“Flushing fluid is DIY-able; replacing the hydraulic unit means bench bleeding and programming.”) with a “Diagnose soon” driveability rating: Base braking is unaffected, but ABS and stability assists are down — drive gently, especially in bad weather. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
abs warning light on
traction control light on
stability control disabled message
Likely causes
valve sticking from contaminated brake fluid
valve coil failed
wiring fault to the hydraulic unit
module driver fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
2. Run a scan-tool output test to cycle each valve and listen for it.
3. Check wiring between the module and hydraulic unit. Tests: wiring fault to the hydraulic unit
4. Flush the brake fluid; if a valve still won't respond, the hydraulic unit needs replacement. Tests: valve sticking from contaminated brake fluid
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$300 – $1200
Labor$200 – $500
ABS hydraulic unit replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C062D ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Flushing fluid is DIY-able; replacing the hydraulic unit means bench bleeding and programming.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →