Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonStability assist is degraded — drive conservatively, especially in rain or snow.
Your stability or traction warning light comes on. The steering itself feels normal, but the computer can't tell which way you're steering, so its skid protection is degraded.
Key facts
C0607 means steering Wheel Angle Sensor Circuit High. Your stability or traction warning light comes on. The steering itself feels normal, but the computer can't tell which way you're steering, so its skid protection is degraded. WrenchFair's published fair-price range for this repair is $80–$300 parts and $100–$250 labor at independent shops.
WrenchFair rates C0607 a 3-of-5 DIY difficulty (“Replacement means pulling the steering wheel — doable, but mind the airbag precautions.”) with a “Diagnose soon” driveability rating: Stability assist is degraded — drive conservatively, especially in rain or snow. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
stability control warning light on
traction control light on
steering angle reads off-center in live data
Likely causes
short to power in wiring
sensor shorted internally
connector water intrusion
module fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. With wheels straight, check live steering-angle data — it should read near zero.
2. Turn lock to lock and watch for smooth, continuous readings with no dropouts.
3. Inspect the clock spring area and connector if steering work was done recently. Tests: connector water intrusion
4. Check wiring between the sensor and module for damage.
5. Replace the sensor (often part of the clock spring assembly) if readings are erratic or frozen.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $300
Labor$100 – $250
Steering angle sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0607 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Replacement means pulling the steering wheel — doable, but mind the airbag precautions.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →