C05B8: Brake Booster Motor A Position Sensor Supply Circuit/Open
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBraking takes much more effort without boost — drive carefully and get it fixed promptly.
A brake warning comes on and the pedal gets harder — the booster's position sensor is starved of proper power.
Key facts
C05B8 means brake Booster Motor A Position Sensor Supply Circuit/Open. A brake warning comes on and the pedal gets harder — the booster's position sensor is starved of proper power. WrenchFair's published fair-price range for this repair is $20–$1200 parts and $100–$550 labor at independent shops.
WrenchFair rates C05B8 a 3-of-5 DIY difficulty (“Check the feed with a multimeter before condemning the booster — supply faults are often wiring.”) with a “Diagnose soon” driveability rating: Braking takes much more effort without boost — drive carefully and get it fixed promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake pedal much harder than normal
brake assist unavailable message
Likely causes
wiring broken
connector unplugged
blown fuse
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Measure the sensor supply voltage right at the booster connector. Tests: connector unplugged
2. Check the fuse and trace the supply wiring for breaks, shorts, or corrosion.
3. If the supply is good at the connector, the internal sensor or booster has failed. Tests: connector unplugged
4. Repair wiring or replace the booster assembly.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $1200
Labor$100 – $550
Supply wiring repair or brake booster replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C05B8 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Check the feed with a multimeter before condemning the booster — supply faults are often wiring.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →