Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBase braking is unaffected, but ABS and stability assists are down — drive gently, especially in bad weather.
ABS and traction warnings come on. Your regular brakes still work fine, but the anti-lock pulsing and stability assists that need the pump are offline.
Key facts
C05AE means aBS Pump Motor Calibration Not Learned. ABS and traction warnings come on. Your regular brakes still work fine, but the anti-lock pulsing and stability assists that need the pump are offline. WrenchFair's published fair-price range for this repair is $0–$50 parts and $75–$175 labor at independent shops.
WrenchFair rates C05AE a 2-of-5 DIY difficulty (“Calibration is a scan-tool procedure — no parts unless the pump itself is dead.”) with a “Diagnose soon” driveability rating: Base braking is unaffected, but ABS and stability assists are down — drive gently, especially in bad weather. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
abs warning light on
traction control light on
stability control disabled message
Likely causes
calibration never performed after replacement
calibration lost after module reset
replacement unit installed without running the learn
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the high-current ABS fuse and the pump's power and ground connections — corrosion here is common.
2. Measure supply voltage at the pump connector while a helper turns the key on.
3. Run the pump motor calibration/learn procedure with a capable scan tool. Tests: calibration never performed after replacement
4. Road-test, including an ABS stop on a safe surface, to confirm.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $50
Labor$75 – $175
ABS pump motor calibration. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C05AE ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Calibration is a scan-tool procedure — no parts unless the pump itself is dead.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →