C05A3

C05A3: Wheel Speed Sensors Supply Circuit High

DIY difficulty 3/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

All of your wheel speed sensors share one power feed from the ABS module, and that feed is reading too high. Expect ABS and traction warnings, and don't chase individual sensors — the problem is upstream.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 5 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. 1. Read all stored codes — companion wheel-speed codes point to the shared supply, not four bad sensors. Tests: short to power in the sensor supply wiring
  2. 2. Disconnect all four wheel speed sensors and measure the supply voltage at the module connector. Tests: corroded splice or connector in the supply harness
  3. 3. If the supply is still wrong with everything unplugged, trace the supply wiring for shorts, chafing, or corrosion. Tests: short to power in the sensor supply wiring
  4. 4. If the supply is good unplugged, reconnect sensors one at a time to find the one dragging it down. Tests: short to power in the sensor supply wiring
  5. 5. Repair the wiring or replace the faulty sensor, then clear codes and road-test.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$20 – $120
Labor$100 – $250

Wheel speed sensor supply wiring repair. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C05A3 ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

3 of 5 — Finding a wiring short takes patience; a multimeter and the wiring diagram are essential.

Watch this repair on YouTube

Parts & tools

ABS / wheel-speed toolkit — what the job actually takes

Torque specs: Wheel-speed sensor bolts: typically 8–12 Nm. (Caliper bracket bolts are far tighter — 90–140 Nm — don’t confuse them.)

Pro tip: Inspect the tone ring/reluctor for cracks and debris first — the sensor itself is often innocent.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →