C059A: Power Steering Control Module - Rear Missing Calibration
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonThe car steers normally with the front wheels — rear assist is just offline.
A steering warning asks for a calibration. The rear steering is waiting to be taught its center and travel limits.
Key facts
C059A means power Steering Control Module - Rear Missing Calibration. A steering warning asks for a calibration. The rear steering is waiting to be taught its center and travel limits. WrenchFair's published fair-price range for this repair is $0–$50 parts and $75–$175 labor at independent shops.
WrenchFair rates C059A a 2-of-5 DIY difficulty (“A scan-tool calibration procedure.”) with a “Diagnose soon” driveability rating: The car steers normally with the front wheels — rear assist is just offline. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
rear steering warning light on
reduced low-speed maneuverability
rear wheels stay straight
Likely causes
module replaced without calibration
calibration lost after reset
battery disconnect during programming
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 3 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Confirm no other rear-steering codes are present.
2. Run the rear steering calibration with a capable scan tool. Tests: module replaced without calibration
3. Road-test to confirm.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $50
Labor$75 – $175
Rear steering calibration. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C059A ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →