Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBraking takes much more effort without boost — drive carefully and get it fixed promptly.
A brake warning comes on and the pedal gets much harder — the booster's power electronics have failed internally.
Key facts
C0595 means brake Booster Internal Power Driver Range/Performance. A brake warning comes on and the pedal gets much harder — the booster's power electronics have failed internally. WrenchFair's published fair-price range for this repair is $400–$1200 parts and $250–$550 labor at independent shops.
WrenchFair rates C0595 a 4-of-5 DIY difficulty (“Internal electronics — there's no component-level fix; the booster assembly gets replaced.”) with a “Diagnose soon” driveability rating: Braking takes much more effort without boost — drive carefully and get it fixed promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake pedal much harder than normal
brake assist unavailable message
Likely causes
power driver overheated and failed
voltage spike damaged the driver
booster control module internal fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Verify the booster's power and ground are clean — rule out the feed first.
2. Check for related overvoltage or overheating codes.
3. If the feed is good, the internal driver has failed — replace the booster assembly. Tests: booster control module internal fault
4. Calibrate the new booster per the service procedure. Tests: booster control module internal fault
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$400 – $1200
Labor$250 – $550
Electric brake booster replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0595 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Internal electronics — there's no component-level fix; the booster assembly gets replaced.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →