C0579: Brake Booster Temperature Sensor B Circuit Low
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBase braking works, but boost may be limited — get it diagnosed soon.
A brake-system warning comes on. The booster might reduce its assist to protect itself from heat it can't properly measure.
Key facts
C0579 means brake Booster Temperature Sensor B Circuit Low. A brake-system warning comes on. The booster might reduce its assist to protect itself from heat it can't properly measure. WrenchFair's published fair-price range for this repair is $40–$150 parts and $100–$250 labor at independent shops.
WrenchFair rates C0579 a 3-of-5 DIY difficulty (“Standard sensor circuit diagnosis — compare against the redundant sensor to spot the liar.”) with a “Diagnose soon” driveability rating: Base braking works, but boost may be limited — get it diagnosed soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake assist may be reduced
booster enters thermal protection mode
Likely causes
short to ground
sensor shorted internally
connector corrosion
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the sensor's connector and wiring for damage or corrosion. Tests: connector corrosion
2. Compare the sensor's live temperature reading against the other booster temp sensor and ambient temperature.
3. Check for the short or open in the wiring if the reading is pinned.
4. Replace the sensor if the wiring is good but the reading is wrong.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$40 – $150
Labor$100 – $250
Booster temperature sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0579 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Standard sensor circuit diagnosis — compare against the redundant sensor to spot the liar.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →