C0577: Park Brake Force Sensor Circuit Malfunction
DIY difficulty 3/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonDon't rely on the parking brake until it's fixed.
Your parking brake warning light comes on. The parking brake may still work, but the computer can't fine-tune how hard it clamps.
Key facts
C0577 means park Brake Force Sensor Circuit Malfunction. Your parking brake warning light comes on. The parking brake may still work, but the computer can't fine-tune how hard it clamps. WrenchFair's published fair-price range for this repair is $150–$400 parts and $150–$350 labor at independent shops.
WrenchFair rates C0577 a 3-of-5 DIY difficulty (“The sensor is part of the actuator/caliper — diagnosis is electrical, repair is usually the assembly.”) with a “Diagnose soon” driveability rating: Don't rely on the parking brake until it's fixed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
parking brake warning light on
epb performance may be reduced
epb may not hold on steep hills
Likely causes
force sensor failed
wiring or connector fault
sensor out of calibration
module fault (rare)
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the actuator connector and wiring for damage or corrosion. Tests: wiring or connector fault
2. Look for companion actuator codes and fix those first.
3. If the wiring is good, the internal force sensor has failed — replace the actuator or caliper assembly. Tests: force sensor failed
4. Run the EPB calibration after replacement. Tests: sensor out of calibration
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$150 – $400
Labor$150 – $350
EPB actuator replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0577 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — The sensor is part of the actuator/caliper — diagnosis is electrical, repair is usually the assembly.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →