C0573: Electric Park Brake Switch Circuit Malfunction
DIY difficulty 2/5
Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIf the parking brake won't apply, don't park on hills until it's fixed.
The button that works the parking brake isn't reading correctly. You may not be able to set or release the parking brake from the button.
Key facts
C0573 means electric Park Brake Switch Circuit Malfunction. The button that works the parking brake isn't reading correctly. You may not be able to set or release the parking brake from the button. WrenchFair's published fair-price range for this repair is $20–$100 parts and $50–$150 labor at independent shops.
WrenchFair rates C0573 a 2-of-5 DIY difficulty (“Usually a cheap switch behind a trim panel — the trim clips are the hardest part.”) with a “Diagnose soon” driveability rating: If the parking brake won't apply, don't park on hills until it's fixed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
parking brake warning light on
epb button does nothing
parking brake may not apply or release
Likely causes
switch failed or worn out
liquid spilled into the switch
switch connector loose or corroded
wiring fault
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Try the switch in both directions — a dead or mushy feel points at the switch.
2. Remove the trim and check the switch connector. Tests: switch connector loose or corroded
3. Test the switch contacts with a multimeter while operating it.
4. Replace the switch if it doesn't change state cleanly.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$20 – $100
Labor$50 – $150
EPB switch replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0573 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Usually a cheap switch behind a trim panel — the trim clips are the hardest part.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →