Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIf the pedal is getting hard, assist is really fading — get it checked promptly.
A brake-system warning comes on. The pedal may feel normal or slightly harder; the computer just can't verify its assist.
Key facts
C0556 means brake Booster Pressure Sensor Performance. A brake-system warning comes on. The pedal may feel normal or slightly harder; the computer just can't verify its assist. WrenchFair's published fair-price range for this repair is $60–$200 parts and $80–$200 labor at independent shops.
WrenchFair rates C0556 a 3-of-5 DIY difficulty (“Rule out a real vacuum problem before replacing the sensor.”) with a “Diagnose soon” driveability rating: If the pedal is getting hard, assist is really fading — get it checked promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake assist reduced
pedal may feel harder
Likely causes
sensor failed
vacuum leak skewing the reading
wiring fault
sensor out of calibration
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check booster vacuum with a gauge and compare to the sensor reading. Tests: vacuum leak skewing the reading
2. Inspect the booster hose and check valve for leaks.
3. Check the sensor's wiring and connector.
4. Replace the sensor if vacuum is good but the reading is wrong. Tests: vacuum leak skewing the reading
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $200
Labor$80 – $200
Booster pressure sensor replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0556 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Rule out a real vacuum problem before replacing the sensor.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →