Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonIf the pedal is getting hard, assist is really fading — get it checked promptly.
A brake-system warning comes on. If vacuum really is low you'll feel a harder brake pedal; if it's just the sensor, the pedal feels normal but the warning stays.
Key facts
C054C means vacuum Sensor A Circuit High. A brake-system warning comes on. If vacuum really is low you'll feel a harder brake pedal; if it's just the sensor, the pedal feels normal but the warning stays. WrenchFair's published fair-price range for this repair is $60–$200 parts and $80–$200 labor at independent shops.
WrenchFair rates C054C a 3-of-5 DIY difficulty (“Check for a real vacuum leak first — a hissing booster hose is a cheap fix.”) with a “Diagnose soon” driveability rating: If the pedal is getting hard, assist is really fading — get it checked promptly. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake system warning light on
brake pedal feels harder than normal
brake assist reduced
Likely causes
short to power
sensor shorted internally
connector water intrusion
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Listen for vacuum hissing around the booster and check the booster hose and check valve.
2. Measure actual booster vacuum with a gauge and compare to the sensor's live reading.
3. Check the sensor's supply, ground, and signal wiring.
4. Replace the sensor if vacuum is good but its reading is wrong.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$60 – $200
Labor$80 – $200
Vacuum sensor or booster hose replacement. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C054C ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Check for a real vacuum leak first — a hissing booster hose is a cheap fix.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →