Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYour regular brakes work fine, but stability control is off, so the car won't catch a skid for you. Drive carefully on slippery roads.
The sensor that tells your car which way the steering wheel is turned has an electrical fault. Your normal brakes work fine, but stability control is switched off.
Key facts
C0440 means steering Wheel Position Sensor Circuit. The sensor that tells your car which way the steering wheel is turned has an electrical fault. Your normal brakes work fine, but stability control is switched off. WrenchFair's published fair-price range for this repair is $80–$300 parts and $120–$300 labor at independent shops.
WrenchFair rates C0440 a 4-of-5 DIY difficulty (“Calibration needs a scan tool with the right routine; column sensor replacement involves airbag-area work.”) with a “Diagnose soon” driveability rating: Your regular brakes work fine, but stability control is off, so the car won't catch a skid for you. Drive carefully on slippery roads. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
stability control warning light on
abs warning light on
stability control intervenes at odd times or not at all
Likely causes
steering angle sensor failed (often part of the clock spring assembly)
wiring fault in the steering column
calibration lost - recalibrate before replacing parts
module fault is possible but uncommon - check wiring and calibration first
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Clear the code and re-scan after a short drive to confirm it is a hard fault.
2. Check for recent steering column or clock spring work. Tests: steering angle sensor failed (often part of the clock spring assembly)
3. Inspect the sensor connector in the steering column for looseness or corrosion. Tests: steering angle sensor failed (often part of the clock spring assembly)
4. Run the steering angle sensor calibration with a scan tool - a lost calibration can mimic a circuit fault. Tests: steering angle sensor failed (often part of the clock spring assembly)
5. If it won't calibrate, the sensor (often sold with the clock spring) needs replacement. Disconnect the battery and follow airbag safety steps for column work.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $300
Labor$120 – $300
A steering angle sensor (often with clock spring) replacement, roughly $250-$500 installed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0440 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Calibration needs a scan tool with the right routine; column sensor replacement involves airbag-area work.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →