Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeThe warning light itself is broken, so a real problem in that system could go unnoticed. Check that system manually until the light is fixed.
The dashboard warning light for traction control lamp has a wiring or bulb fault. The system it warns about may be fine, but you wouldn't get the warning if something went wrong - so don't ignore this one.
Key facts
C0402 means traction Control Lamp Circuit. The dashboard warning light for traction control lamp has a wiring or bulb fault. The system it warns about may be fine, but you wouldn't get the warning if something went wrong - so don't ignore this one. WrenchFair's published fair-price range for this repair is $15–$120 parts and $60–$180 labor at independent shops.
WrenchFair rates C0402 a 3-of-5 DIY difficulty (“Bulb and wiring checks are easy; cluster removal is fiddly but doable with trim tools.”) with a “Drive safe” driveability rating: The warning light itself is broken, so a real problem in that system could go unnoticed. Check that system manually until the light is fixed. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
warning light stays on
warning light never lights during the key-on bulb check
related system warning on the dash
Likely causes
bulb or LED in the cluster failed
wiring short or open in the lamp control circuit
corroded connector at the cluster or module
module driver fault is possible but uncommon - check the bulb and wiring first
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Turn the key on and watch the bulb check: the lamp should light briefly, then go out. Tests: module driver fault is possible but uncommon - check the bulb and wiring first
2. Check for a failed bulb or LED in the instrument cluster. Tests: bulb or LED in the cluster failed
3. Inspect the wiring between the module and the cluster for shorts or opens. Tests: wiring short or open in the lamp control circuit
4. If the bulb and wiring are good, the module's lamp driver circuit is suspect. Tests: wiring short or open in the lamp control circuit
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $120
Labor$60 – $180
A warning lamp circuit repair, roughly $100-$250 at a shop. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0402 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Bulb and wiring checks are easy; cluster removal is fiddly but doable with trim tools.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →