Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeThis is a ride-comfort issue, not a safety issue - the car drives fine, it just can't adjust its height.
The relay that powers your air suspension's compressor has an electrical fault. The car is safe to drive, but the suspension can't raise itself until the relay circuit works again.
Key facts
C0301 means air Suspension Compressor Relay. The relay that powers your air suspension's compressor has an electrical fault. The car is safe to drive, but the suspension can't raise itself until the relay circuit works again. WrenchFair's published fair-price range for this repair is $15–$60 parts and $60–$150 labor at independent shops.
WrenchFair rates C0301 a 3-of-5 DIY difficulty (“Relay and fuse checks take minutes with the owner's manual fuse diagram.”) with a “Drive safe” driveability rating: This is a ride-comfort issue, not a safety issue - the car drives fine, it just can't adjust its height. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
suspension warning light on
suspension won't raise
compressor never runs
Likely causes
compressor relay failed (most common - it's a cheap part)
blown compressor fuse
corroded relay socket
wiring fault in the relay circuit
module relay driver fault is possible but uncommon - check the relay and fuse first
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Locate the compressor relay in the fuse box and check the fuse first - it's the cheapest fix. Tests: module relay driver fault is possible but uncommon - check the relay and fuse first
2. Swap the relay with an identical one from a non-critical circuit and see if the code clears. Tests: wiring fault in the relay circuit
3. Inspect the relay socket for corrosion or melted plastic. Tests: corroded relay socket
4. Check the wiring between the relay, the compressor, and the module for breaks. Tests: module relay driver fault is possible but uncommon - check the relay and fuse first
5. If the relay, fuse, and wiring are good, the module's relay driver is suspect.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $60
Labor$60 – $150
A compressor relay and fuse replacement, often under $150 at a shop. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0301 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
3 of 5 — Relay and fuse checks take minutes with the owner's manual fuse diagram.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →