Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYour regular brakes work fine, but stability control is off, so the car won't catch a skid for you. Drive carefully on slippery roads.
Your steering sensor thinks the wheel is slightly turned even when you're driving straight. Your normal brakes work fine, but stability control is switched off.
Key facts
C0295 means steering Sensor Indicates Bias. Your steering sensor thinks the wheel is slightly turned even when you're driving straight. Your normal brakes work fine, but stability control is switched off. WrenchFair's published fair-price range for this repair is $0–$150 parts and $80–$250 labor at independent shops.
WrenchFair rates C0295 a 4-of-5 DIY difficulty (“Calibration needs a scan tool with the right routine; column sensor replacement involves airbag-area work.”) with a “Diagnose soon” driveability rating: Your regular brakes work fine, but stability control is off, so the car won't catch a skid for you. Drive carefully on slippery roads. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
stability control warning light on
abs warning light on
stability control intervenes at odd times or not at all
Likely causes
steering angle sensor needs recalibration after alignment or repair (most common)
wheel alignment incorrect with the steering wheel off-center
steering angle sensor loose or failed
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Drive straight on a level road and read steering angle live data: anything more than a few degrees off zero confirms the bias. Tests: steering angle sensor needs recalibration after alignment or repair (most common)
2. Check the wheel alignment and whether the steering wheel sits centered. Tests: wheel alignment incorrect with the steering wheel off-center
3. Run the steering angle sensor calibration with a scan tool. Tests: steering angle sensor needs recalibration after alignment or repair (most common)
4. If the bias returns or the sensor won't calibrate, replace the sensor.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $150
Labor$80 – $250
A wheel alignment plus sensor recalibration, roughly $100-$300. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0295 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Calibration needs a scan tool with the right routine; column sensor replacement involves airbag-area work.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →