Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonBrake boost may be reduced, so the pedal feels harder and stopping distances grow. Your base brakes still work, but get this checked soon.
Your car's powered brake booster system has a fault. Your brakes still work, but the pedal may feel harder because the power assist is limited.
Key facts
C0266 means active Brake Booster. Your car's powered brake booster system has a fault. Your brakes still work, but the pedal may feel harder because the power assist is limited. WrenchFair's published fair-price range for this repair is $200–$700 parts and $200–$400 labor at independent shops.
WrenchFair rates C0266 a 4-of-5 DIY difficulty (“Diagnosis is doable with a scan tool; booster replacement is a shop job.”) with a “Diagnose soon” driveability rating: Brake boost may be reduced, so the pedal feels harder and stopping distances grow. Your base brakes still work, but get this checked soon. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
brake pedal feels harder than normal
brake system warning light on
abs or stability control light on
Likely causes
active booster assembly fault
booster sensor failed
wiring fault to the booster
low system voltage - check the battery first
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check battery voltage and charging system first. Tests: low system voltage - check the battery first
2. Scan for booster sensor codes and fix those first. Tests: booster sensor failed
3. Watch booster pressure or assist data in scan tool live data while pressing the pedal. Tests: active booster assembly fault
4. Inspect the booster wiring and connector. Tests: wiring fault to the booster
5. If the booster won't build assist with good power and wiring, it needs replacement.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$200 – $700
Labor$200 – $400
An active brake booster repair, roughly $500-$1,000 installed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0266 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Diagnosis is doable with a scan tool; booster replacement is a shop job.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →