Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonTraction control may be limited. Fix whatever the engine module is complaining about first.
Your engine computer reported a problem that affects traction control, and the ABS computer is passing the message along. Fix the engine side first - this code usually follows it away.
Key facts
C0242 means pCM Indicated ABS Malfunction. Your engine computer reported a problem that affects traction control, and the ABS computer is passing the message along. Fix the engine side first - this code usually follows it away. WrenchFair's published fair-price range for this repair is $0–$200 parts and $100–$300 labor at independent shops.
WrenchFair rates C0242 a 4-of-5 DIY difficulty (“The skill here is reading all modules, not just ABS.”) with a “Diagnose soon” driveability rating: Traction control may be limited. Fix whatever the engine module is complaining about first. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
abs or traction control light on
engine light may also be on
cruise control stops working
Likely causes
an underlying engine fault - scan the engine module first (most common)
traction control torque request fault
communication loss between the engine and ABS modules
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Scan the engine module and fix any engine codes first - this code is usually a follower. Tests: an underlying engine fault - scan the engine module first (most common)
2. Look for communication codes between the engine and ABS modules. Tests: communication loss between the engine and ABS modules
3. Check powers and grounds if communication codes are present. Tests: communication loss between the engine and ABS modules
4. Clear all codes and retest only after the engine side is clean.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$0 – $200
Labor$100 – $300
Usually resolved by fixing the underlying engine fault. Standalone diagnosis runs $100-$300 at a shop. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0242 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — The skill here is reading all modules, not just ABS.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →