Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYour brakes work, but verify your brake lights - other drivers depend on them.
The brake pedal switch that talks to your ABS and traction control has an electrical fault. Your brakes work, but those systems may not know when you're braking.
Key facts
C0161 means aBS/TCS Brake Switch Circuit. The brake pedal switch that talks to your ABS and traction control has an electrical fault. Your brakes work, but those systems may not know when you're braking. WrenchFair's published fair-price range for this repair is $15–$60 parts and $60–$150 labor at independent shops.
WrenchFair rates C0161 a 2-of-5 DIY difficulty (“Same easy pedal-area job as a stop lamp switch.”) with a “Diagnose soon” driveability rating: Your brakes work, but verify your brake lights - other drivers depend on them. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
abs or traction control light on
brake lights may not work correctly
cruise control won't engage
Likely causes
brake switch failed or misadjusted (most common)
wiring fault to the switch
blown fuse in the brake switch circuit
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check that the brake lights work correctly.
2. Check the fuse for the brake switch circuit. Tests: blown fuse in the brake switch circuit
3. Inspect the switch adjustment at the brake pedal. Tests: brake switch failed or misadjusted (most common)
4. Test or replace the switch, then clear the code and retest.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$15 – $60
Labor$60 – $150
A brake switch replacement, often under $150 installed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0161 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
2 of 5 — Same easy pedal-area job as a stop lamp switch.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →