Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Diagnose soonYour regular brakes keep working normally, but ABS, traction control, and stability control are probably disabled until this is fixed. Drive gently on wet or slippery roads.
The sensor reading your brake system's hydraulic pressure is sending readings the computer doesn't trust. Your normal brakes work, but ABS and stability control are likely switched off.
Key facts
C0090 means hydraulic Brake Pressure Sensor Circuit. The sensor reading your brake system's hydraulic pressure is sending readings the computer doesn't trust. Your normal brakes work, but ABS and stability control are likely switched off. WrenchFair's published fair-price range for this repair is $100–$350 parts and $150–$350 labor at independent shops.
WrenchFair rates C0090 a 4-of-5 DIY difficulty (“Fluid and wiring checks are DIY; the sensor is often part of the hydraulic unit.”) with a “Diagnose soon” driveability rating: Your regular brakes keep working normally, but ABS, traction control, and stability control are probably disabled until this is fixed. Drive gently on wet or slippery roads. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
abs warning light on
traction control or stability control light on
brake assist may feel different
Likely causes
brake pressure sensor failed
wiring fault to the sensor
corroded connector
module fault is possible but uncommon - check the sensor and wiring first
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 4 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check the brake fluid level and condition first. Tests: module fault is possible but uncommon - check the sensor and wiring first
2. Watch the pressure sensor in scan tool live data while pressing the brake pedal - it should rise smoothly with effort. Tests: brake pressure sensor failed
3. Inspect the sensor wiring and connector for damage or corrosion. Tests: wiring fault to the sensor
4. If the signal is dead, stuck, or out of range with good wiring and fluid, the sensor (often serviced with the hydraulic unit) needs replacement. Tests: wiring fault to the sensor
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$100 – $350
Labor$150 – $350
A brake pressure sensor repair, roughly $300-$600 installed. If it's part of the hydraulic unit, costs run higher. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0090 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Fluid and wiring checks are DIY; the sensor is often part of the hydraulic unit.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →