Print shop one-pagerTake this page to the shop — causes, fair prices, and sharp questions on one sheet.
Drive safeSteering still works - you just lose the speed-sensitive assist. It may feel heavy parking or light on the highway.
The system that makes your steering light at low speed and firm on the highway isn't working. Steering still works - it just won't change effort with speed.
Key facts
C0079 means variable Effort Steering. The system that makes your steering light at low speed and firm on the highway isn't working. Steering still works - it just won't change effort with speed. WrenchFair's published fair-price range for this repair is $80–$300 parts and $100–$250 labor at independent shops.
WrenchFair rates C0079 a 4-of-5 DIY difficulty (“Fluid and wiring checks are easy; rack or column actuator work is a shop job.”) with a “Drive safe” driveability rating: Steering still works - you just lose the speed-sensitive assist. It may feel heavy parking or light on the highway. These are this guide’s own published ratings.
For labor context, WrenchFair's methodology page cites two published numbers: about half of US independent shops charge $120–$159/hr (PartsTech survey of 752 shops, fall 2024), and the national average posted mechanical rate was $163/hr in June 2026 (NABR LaborRateHero). Multiply either band by a quote's labor hours to judge whether its labor line is in range.
Symptoms
steering effort doesn't change with speed
power steering warning light on
steering may feel heavy at low speed or light on the highway
Likely causes
variable-assist solenoid or actuator failed
wiring fault to the steering rack or column
low power steering fluid (hydraulic systems)
module fault is possible but uncommon - check fluid and wiring first
Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →
Before you buy the part — 5 checks
Work these checks before spending money — each one rules a cause in or out, cheapest first.
1. Check power steering fluid level and condition (hydraulic systems). Tests: low power steering fluid (hydraulic systems)
2. Scan for other steering codes and fix those first. Tests: wiring fault to the steering rack or column
3. Inspect the wiring and connector at the variable-assist solenoid or actuator. Tests: variable-assist solenoid or actuator failed
4. With a scan tool, try commanding the assist solenoid and check for a response. Tests: variable-assist solenoid or actuator failed
5. If the actuator won't respond, it needs replacement.
No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.
Typical price range
Parts$80 – $300
Labor$100 – $250
A variable-assist solenoid or actuator repair, roughly $200-$450 at a shop. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.
Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.
What will this cost to fix?A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C0079 ranked, each with a price range. They handed you a printout at the parts store? Decode it before you buy.
DIY difficulty
4 of 5 — Fluid and wiring checks are easy; rack or column actuator work is a shop job.
Who's behind this guide?WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes.Read the full methodology →