C003C

C003C: Rear Tone Wheel

DIY difficulty 4/5

Print shop one-pager Take this page to the shop — causes, fair prices, and sharp questions on one sheet.

The toothed ring the rear wheel speed sensor reads is likely cracked, rusty, or packed with debris. Your normal brakes work fine, but ABS and traction control may be disabled.

Key facts

Symptoms

Likely causes

Too many suspects? Answer 4–6 quick questions and this page's published cause list re-orders itself for your situation — plus the cheapest test to run next. Start the elimination wizard →

Before you buy the part — 6 checks

Work these checks before spending money — each one rules a cause in or out, cheapest first.

  1. 1. Clear the code, drive above about 15 mph, and re-scan. Only spend money if the code comes back.
  2. 2. Watch the rear wheel speed in ABS live data at low speed. A dead, jumpy, or mismatched reading confirms the problem corner. Tests: wheel speed sensor reading the damaged ring incorrectly
  3. 3. Unplug the rear sensor and inspect the connector for corrosion, moisture, or bent pins.
  4. 4. Inspect the tone (reluctor) ring through the sensor hole or behind the hub: look for cracked, missing, or rust-packed teeth, and clean out debris. Tests: cracked, corroded, or debris-packed tone (reluctor) ring
  5. 5. Trace the sensor harness along the wheel-arch flex point and look for chafing, cracks, or old repairs.
  6. 6. If the wiring and tone ring check out, replace the rear wheel speed sensor — it is the most common fix.

No scan tool yet? The Veepeak OBDCheck (~$32) reads and clears codes from your phone in about two minutes.

Typical price range

Parts$40 – $180
Labor$90 – $250

A tone (reluctor) ring replacement, often $150-$400 installed. National-average estimate for the most common repair for this code. Actual quotes vary by vehicle, region, and shop - get a local written estimate.

Dealer vs independent shop: these ranges reflect typical independent-shop prices. A dealer will usually quote higher — higher labor rates plus OEM-only parts — so a dealer quote at the top of (or a bit above) this range isn't automatically a rip-off. For a big dealer number, get a second quote from an independent shop before authorizing the work.

Got a shop quote? Grade it →

What will this cost to fix? A code doesn’t name the repair — run the code-first estimator to see the most likely fixes for C003C ranked, each with a price range.
They handed you a printout at the parts store? Decode it before you buy.

DIY difficulty

4 of 5 — Sensor and harness work with basic hand tools; seized sensors and corroded connectors are the usual fights.

Watch this repair on YouTube

Parts & tools

ABS / wheel-speed toolkit — what the job actually takes

Torque specs: Wheel-speed sensor bolts: typically 8–12 Nm. (Caliper bracket bolts are far tighter — 90–140 Nm — don’t confuse them.)

Pro tip: Inspect the tone ring/reluctor for cracks and debris first — the sensor itself is often innocent.

As an Amazon Associate, WrenchFair earns from qualifying purchases.

Related codes

Check another code
Got a quote?Grade it →Shop one-pagerPrint it →Another code?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →