WrenchFair › Warning lights › Coolant temperature warning light
Stop now

Coolant temperature warning light: what it means and what to do

Pull over, switch off, and let it cool

What this light means

Pull over safely, switch off the engine, and let it cool. Never open a hot cooling system. This red thermometer light means the engine is overheating. Continuing to drive an overheating engine risks a warped cylinder head or a blown head gasket — both far more expensive than the original cooling problem.

What to do right now

  1. Pull over somewhere safe and switch the engine off.
  2. Wait — at least 30–45 minutes — until the engine is cool to the touch. Never open a hot cooling system; the pressurized coolant can cause severe burns.
  3. Once cool, check the coolant level in the reservoir (never the radiator cap on a hot engine) and look for obvious leaks or a broken belt.
  4. If the level was low, top up with the correct coolant and drive gently while watching the gauge — but get the leak found soon. If it overheats again, stop and call a tow.

Can I drive with it on?

Not while the light is on. Pull over, switch off, and let it cool. Driving an overheating engine risks head-gasket or cylinder-head damage that dwarfs the cost of the original repair.

Will it go away on its own?

The light goes off as the engine cools, but the cause — a leak, a stuck thermostat, a failed fan, low coolant — is still there. It will come back. Find and fix the cause before trusting the car on a long drive.

Quick answers

Can I drive with the coolant temperature light on?

No — pull over safely, switch the engine off, and let it cool. Driving an overheating engine risks warped heads or a blown head gasket.

Can I open the radiator cap to check the coolant?

Never on a hot engine. The cooling system is pressurized and the coolant can cause severe burns. Wait until the engine is fully cool, then check the reservoir.

What to do next

Diagnose your car → All warning lights

Got a shop quote? Grade it →

Got a quote?Grade it →Have a code?Diagnose it →Another light?Look it up →
Who's behind this guide? WrenchFair is built by a fellow DIYer, not a repair shop. Code meanings follow the SAE J2012 standard; cause rankings come from real-world repair evidence (service bulletins, owner reports, NHTSA records); prices are typical US ranges, not quotes. Read the full methodology →