The engine computer found a fault. A steady light usually allows careful driving; a flashing light means stop and avoid catalytic-converter damage. A steady check engine light is the amber 'heads up' of the dashboard: the engine computer (ECU) has detected something outside its expected range and stored a diagnostic trouble code. A loose or missing gas cap is the most common trivial cause — tightening it and driving a few normal trips often clears the light on its own.
A steady light usually allows careful driving while you arrange a diagnosis. A flashing light is different: stop as soon as it is safe — driving on a flashing check engine light can destroy the catalytic converter, turning a small repair into a big one.
Sometimes. If the fault doesn't come back, the light may turn off on its own after several normal drive cycles — but the code stays stored in the computer. The underlying fault rarely fixes itself, so get the code read even if the light goes out.
A steady check engine light usually allows careful driving while you arrange a diagnosis. A flashing check engine light means stop as soon as it is safe — it signals a severe misfire that can destroy the catalytic converter.
Flashing means a severe engine misfire is happening right now. Unburned fuel is reaching the exhaust, where it can overheat and destroy the catalytic converter. Pull over safely and stop the engine.
It can turn off by itself after several drive cycles if the fault doesn't return, but the code stays stored. The fault itself rarely fixes itself — get the code read even if the light goes out.
Diagnose your car → All warning lights
Got a shop quote? Grade it →